|
"My name is Jason Willmon and I am running a 415 SBC with a 106mm Turbo on alcohol, making apprx 1500 hp. (see pics)
My converter was balloning and putting excessive forward thrust on the crankshaft, and when took the manifold off to inspect everything for the winter, we noticed some copper in the lifter valley.
With that said, we disassembled the short block and found the thrust bearing completely eaten away, and the crank was walking forward so bad that it stacked the # 2 and the # 3 main bearings, and was also eating into the main webbing of the block and caps.
We are running a fram hp4 filter and cut it open to find that the filtermag caught an amazing amount of metal. I mean amazing.
Every bearing except the two spun main bearings and the thrust bearing was in perfect shape....nothing else was hurt.
I know that without the Filtermag, my engine would not have lived. It's the cheapest insurance you can buy."
- Jason Willmon - See pictures below:
"Being an Amsoil dealer I thought my oil was as clean as it could ever be...Then I used a FilterMAG. I can't believe there was that much "junk" still in my oil that was missed by my filter."
- Carleton A.
Hawaii
"I use two big Mack trucks in my materials handling business. I "snapped" a FilterMAG on each of them. After 6,000 miles I cut the filter(s) open. The Mack mechanic and I were both so amazed at the amount of particles the FilterMAG trapped!
I immediately bought FilterMAGs for my brand new '03 Advantage Boat and all my other vehicles."
- Joe C.
Simi Valley, CA
"I purchased a FilterMAG at Sturgis last year for my bike, snapped it on, and then drove home to Wisconsin. Once I got home, I cut my filter open. When I saw all of the debris that was trapped, I immediatly called and signed up as a FilterMAG dealer."
- J. Kennedy
Loyal, WI
"My wife Diane and I purchased a brand new speedboat. I installed an HP365 FilterMAG on my boat and ran it for only 20 hours - the amount of particles it caught was amazing! I will never run my boat again without my FilterMAG."
- G Farachi
Norco CA
"I will never race my baja bug in SCORE Off Road without my FilterMAG!!! (Class 5-1600)"
- Billy G.
Lake Havasu City, AZ
" purchased a FilterMAG for my RV - Once I saw how much cleaner my oil stayed, I decided to "snap" on one my diesel gas filter as well."
- B Bays
Ventura, CA
"It takes two seconds to install, costs nothing to maintain, and will last forever, helping to extend the life of my engine."
- J Smith
Los Angeles, CA
"Don't let its simplicity fool you. It is extremely effective. It works. And, I whole heartedly recommend it."
- F Gonzales
Las Vegas, NV
"Those interested in taking good care of their engines, should take a look at FilterMAG. These powerful magnets are custom made to fit all popular spin-on filters. They grip harder than a pit bull."
- E Noble
Oakland, CA
"Greatly improves the filtration process of my engines. It keeps us running for 500 brutal miles."
- D Morrison, Driver for Barnett Transportation in Class 8100 Stock-Full Size
Lake Havasu City, AZ
|
|
|
